Gas Cylinder Warmers, Heaters

Gas Cylinder Warmers/Heaters
Gas Cylinder Warmers/Heaters
Gas Cylinder Heaters
Gas Cylinder Heaters

GAS CYLINDER WARMERS, HEATERS- PRODUCT HIGHLIGHTS DESCRIPTION

  • Improves process control and reduces wasted gas that has condensed
    Creates convection current    Increases pressure inside cylinder
  • Gases known to benefit from this process:
    SF6, Propane, Nitrogen, Oxygen, BCl3, WF6, and HF
  • Fits most gas cylinders
  • Full surface coverage
  • Insulation reduces heat loss
  • Models for hazardous locations
  • Class I Division 1 Groups B, C and D
  • ATEX II 2G EEx de IIB T6

 

Specifications:

  • Self-regulating grounded heating element
  • Total watts: up to 150
  • 150°F (66°C) maximum exposure temperature on heating surface
  • Available in 120 and 240 VAC
  • Frequency range: 50-60Hz
  • Insulation thickness:
    Sides: 2.0" (51mm)
    Top: 0.5" (13mm)
  • Ambient temperature range: 30° to 95°F (-1° to 35°C)
  • Closure: hook and loop fastener like VELCRO®:
  • Moisture and oil resistant
  • Capable of being used outdoors
  • Power lead type
    Ordinary location model: SJOW cord
    Hazardous location models: Teck 90 cable
  • Power lead length: 10 feet (3m)
  • Optional cylinder base insulation pad and valve cover to further reduce heat loss

 

 

  Gas Cylinder Warmers, Heaters

 

 

 

How To Order Gas Cylinder Warmers Heaters
Ordering Information:
Part Number Matrix:

Ordinary Locations and Class I Division I Groups B, C & D
NOTE: Maximum and minimum for the length and diameter will also depend on the amount of wattage needed. Due to the nature of the heating element, there is a possibility of a high inrush current during start up at lower ambient temperatures.
ATEX II 2G EEx de IIB T6

NOTE: Maximum and minimum for the length and diameter will also depend on the amount of wattage needed. Due to the nature of the heating element, there is a possibility of a high inrush current during start up at lower ambient temperatures.
NOTE: Maximum and minimum for the length and diameter will also depend on the amount of wattage needed. Due to the nature of the heating element, there is a possibility of a high inrush current during start up at lower ambient temperatures.
Accessories:

 

Part Number Description
GCWTOP Gage / valve cover
GCW12B Cylinder base insulation pad for 8" (203mm) cylinder
GCW15B Cylinder base insulation pad for 9" (229mm) cylinder
GCW18B Cylinder base insulation pad for 15" (381mm) cylinder


Cyclinder Base Insulation Pad- Place between cylinder and floor. Further insulates the cylinder from heatsinks such as a concrete floor. Valve Cover- Place on top. Reduces the amount of heat loss through the top of the cylinder.

 

 

 

 

UL Registered Firm World Wide Shipping CSA US
We Ship Our Kapton Polyimide and Silicone Flexible Heaters To OEM’s & Industry World Wide

Inquiries & Technical Support

Telephone: 905-859-8225 Facsimile: 905-859-4691

[email protected]

Toll Free: 1-877-674-9744